manufacturer of St44-0 Steel Pipe in India, buy DIN 2609 Grade St 44-0 Tubes Material at best price
DIN 2609 Grade St 44-0 Carbon Steel Seamless Tubes are low cost mild carbon steel tubes which are used in high temperatures and high pressures. The DIN 2609 Grade St 44-0 Tubes are less hard than high carbon steel material made tubes but have high ductility. The material is made up of carbon, phosphorus and sulfur. The material is stronger with 420MPa minimum yield strength and 550MPa minimum tensile strength.
The St44-0 Steel Pipe is used in high temperature applications such as petroleum, heat exchanger and high pressure applications such as boilers, oil and gas industrial applications. The ST 44-0 DIN 2609 Welded Pipe can range in diameters from 4mm to 1219.2mm depending on the types as seamless or welding pipes. The tubes are smaller in diameters up to 152mm and the welded pipes have larger diameters. The DIN 2609 Gr St44 Hollow Pipe has wall thicknesses range from 0.5mm to 20mm and the schedules vary from sch5 through XXS.
The material of the Welded Carbon Steel DIN 2609 Grade ST 44-0 Tubes has carbon, phosphorus and sulfur in the composition. The minimum yield strength is 420MPa and the minimum tensile strength is 550MPa. Please contact us for your DIN 2609 Gr ST 44-0 Pipe needs.
ST 44-0 DIN 2609 Welded Pipe Suppliers, Check DIN 2609 Grade St 44-0 Specification and Properties
| Welded Pipe Size | 5.0 mm – 1219.2 mm |
|---|---|
| Grade ST 44-0 DIN 2609 EFW Pipe size | 5.0 mm – 1219.2 mm |
| CS Tube Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| Standard | AISI, DIN, EN, GB, IS, JIS, ASTM, ASME Pipe |
| Mild Steel Seamless Pipe Size | 4 to 219mm W. T.: 0.5 to 20mm |
| Carbon Steel DIN 2609 Grade ST 44-0 Seamless Tube Size | 3.35 mm OD To 101.6 mm OD |
| DIN 2609 Gr St44 Pipe Schedule | SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| CS Welded Tube Size | 6.35 mm OD To 152 mm OD |
| DIN 2609 Gr. St 44-0 Tube wall thickness | 0.020" –0.220", (special wall thicknesses available) |
| DIN 2609 Gr St44 Carbon Steel Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| High Temperature Carbon Steel DIN 2609 Gr ST 44-0 Form | Round, Hydraulic, ‘U’ bent or Hollow,LSAW, Boiler, Straight Pipe, Clad Pipe, Rectangular, Square Pipe Etc |
| DIN Gr. 2609 ST44-0 Steel Length | Single Random, Double Random, Standard & Cut length Pipe & Tube |
| Mild Steel Marking | All Tubes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
| Low Temperature Carbon Steel DIN 2609 Grade ST 44-0 Application | Oil Pipe & Tube, Gas Pipe & Tube, Fluid Pipe & Tube, Boiler Pipe & Tube, Heat exchanger Tube |
| Type | Welded, Seamless, ERW, EFW, Fabricated Pipe, ‘U’ bent or Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Tube etc |
| DIN Gr. St 44-0 Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
| Grade ST 44-0 DIN 2609 Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
| 2609 Gr. ST44-0 End | Plain End, Beveled End, Treaded Pipe & Tube |
DIN 2609 Gr St44 Hollow Pipe Stockist in Mumbai, India, View DIN 2609 Grade St 44-0 pipe price list.
| Component length (mm) | OD 30-100 mm | OD 100-254 mm |
| 10-100 | + 1.0/- 0 | + 2.0/- 0 |
| 100-600 | + 2.0/- 0 | + 3.0/- 0 |
| 600-1200 | + 3.0/- 0 | + 4.0/- 0 |
| 1200-5000 | + 5.0/- 0 | + 6.0/- 0 |
| 1/8" IPS(.405" O.D.) | 3 1/2" IPS( 4.000" O.D.) |
|---|---|
| SCH 40, 80 | SCH 10, 40, 80, 160, XXH |
| 1/4" IPS(.540" O.D.) | 4" IPS(4.500" O.D.) |
| SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
| 3/8" IPS(.675" O.D.) | 5" IPS( 5.563" O.D.) |
| SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
| 1/2" IPS(.840" O.D.) | 6" IPS(6.625" O.D.) |
| SCH 5, 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
| 3/4" IPS(1.050" O.D.) | 8 ” IPS(8.625" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
| 1" IPS:(1.315′ O.D.) | 10" IPS(10.750" O.D.) |
| SCH 5, 10, 40, 80, 160, XXH | SCH 10, 20, 40, 80 (.500), TRUE 80(.500) |
| 1-1/4" IPS(1.660" O.D.) | 12" IPS(12.750" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500) |
| 1-1/2" IPS(1.900" O.D.) | 14" IPS(14.000" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH10 (.188), SCH40 (.375) |
| 2" IPS(2.375" O.D.) | 16" IPS(16.000" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH10(.188), SCH40(.375) |
| 2 1/2" IPS(2.875" O.D.) | 18" IPS (18.000" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH-40 (.375) |
| 3" IPS( 3.500" O.D.) | |
| SCH 5, 10, 40, 80, 160, XXH |
| Outer diameter and wall Thickness | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Execution | Size Range | OD Tolerance | Wall tolerance | ||||||
| Hot-rolled Tube | OD – 80 mmOD > 80 mmWall < 12 mmWall - 12 mm | ± 0.4 mm± 0.5 % of OD | ± 0.7 mm± (5 % x wallthickness + 0.1 mm | ||||||
| Hot-rolled peeled tube | All sizesWall < 12 mmWall - 12 mm | + 0.25/- 0 mm | ± 0.8 mm± (5 % x wall thickness+ 0.2 mm) | ||||||
| Cold Worked tubecold-rolled or cold-drawn | OD < 40 mmOD 40 - 80 mmOD > 80 Wall Thickness< 6 mm Wall Thickness6 - 8 mm Wall Thickness > 8 | + 0.30/- 0 mm*+ 0.35/- 0 mm*+ 0.40/- 0 mm* | ± 0.30 mm± 0.35 mm± 0.40 mm | ||||||
| Chemical Properties | |||||||||
| Carbon | Silicon | Manganese | Phosphorous | Sulphur | Molybdenum | Nickel | Chromium | Copper | Others |
|---|---|---|---|---|---|---|---|---|---|
| max 0.21 | – | – | 0.04 | 0.04 | – | – | – | – | – |
buy Cut to Length of Welded Carbon Steel DIN 2609 Grade ST 44-0 Tubes at discounted price
| Mechanical Properties | |||||||||
| Yield Strength | Tensile Strength | Elongation A5 min | |||||||
|---|---|---|---|---|---|---|---|---|---|
| MPa min | ksi min | MPa min | MPa min | ksi min | Percentage | ||||
| 420 | 550 | – | 21 | ||||||
Ready Stock of DIN 2609 Gr ST 44-0 Carbon Steel Round Pipe material.
| Equivalent Designation | |||||
| DIN | EN | BS | NFA | ASTM | ASME |
|---|---|---|---|---|---|
| DIN 2609 Grade St 44-0 | – | – | – | – | – |
- AD 2000-W2
- ASME B 16.9
- VdTÜV 418
- VdTÜV 1252
- ASTM / ASME A / SA 815 / 403
- EN 10253-4
- DIN 2605-1/-2
- DIN 2609
- VdTÜV 421
- AD 2000-W10
- EN 10253-3