sales1@multimetalsindia.com
+91 9769008769

EN 10210-1 Grade S235JRH Carbon Steel Seamless Pipes and Tubes

Home EN 10210-1 Grade S235JRH Carbon Steel Seamless Pipes and Tubes
EN 10210-1 Grade S235JRH Carbon Steel Seamless pipe and tube

BS EN 10210-1 Pipes Material manufcaturer in india at low price according to Standard

EN 10210-1 Grade S235JRH Pipes & Tubes are made as seamless pipes and tubes. These are mild carbon steel products. The products are of low cost and low carbon content.  The amount of carbon is 0.17% in the chemical composition with manganese, phosphorus and sulfur. Multi Metals (India) is a leading manufacturer and supplier of the EN 10210 S235JRH Seamless Pipe types. The pipes have good machining abilities and welding abilities. Since this is a low carbon material, it could be welded without the risk of localized corrosion.

The EN 10210-1 Grade S235JRH Carbon Steel Seamless Pipes and Tubes are used in structural, mechanical and high temperature and pressure applications. The different types of the EN 10210-1 Grade S235JRH Pipes have different strength values. The minimum tensile strength is 470MPa and the minimum yield strength is 340MPa. The pipes are supplied in 5m to 7m lengths.

 

EN 10210-1 Seamless Pipes Suppliers, Have difficulty to find EN 10210-1 Grade S235JRH Pipes and Tubes in tough sizes ? Call Multi Metals India now

 

Standard Quality Specification Of EN 10210-1 Grade S235JRH Pipes & Tubes
  • Dimensional Tolerances : Thickness : (All sizes +/- 10%)
  • Type : Seamless/ Welded / ERW
  • Length : 6000-14000 mm
  • Surface Protection : Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized
  • Wall Thickness : 0.5mm - 25mm
  • Standard : BS EN 10210 - Hot finished structural hollow sections of non-alloy and fine grain steels
  • SHS (Square Hollow Sections) Sizes : 20*20mm-400*400mm
  • Grade : S235JRH
  • Dimension Range : 21.3-914mm
  • Packing : In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark

Supply Cut to length EN 10210-1 hot-finished hollow section tube in all sizes and diameter as per Client requirement


size chart of EN 10210 S235JRH - Hot Finish Square Hollow Section

Size mm kg/m Size mm kg/m
20 x 20 x 2.0 1.12 20 x 20 x 2.5 1.35
25 x 25 x 1.5 1.06 25 x 25 x 2.0 1.43
25 X 25 X 2.5 1.74 25 X 25 X 3.0 2.04
30 X 30 X 2.0 1.68 30 X 30 X 2.5 2.14
30 X 30 X 3.0 2.51 40 x 40 x 1.5 1.81
40 x 40 x 2.0 2.31 40 x 40 x 2.5 2.92
40 x 40 x 3.0 3.45 40 x 40 x 4.0 4.46
40 x 40 x 5.0 5.40 50 x 50 x 1.5 2.28
50 x 50 x 2.0 2.93 50 x 50 x 2.5 3.71
50 x 50 x 3.0 4.39 50 x 50 x 4.0 5.72
50 x 50 x 5.0 6.97 60 x 60 x 3.0 5.34
60 x 60 x 4.0 6.97 60 x 60 x 5.0 8.54
60 x 60 x 6.0 9.45 70 x 70 x 3.0 6.28
70 x 70 x 3.6 7.46 70 x 70 x 5.0 10.11
70 x 70 x 6.3 12.50 70 x 70 x 8 15.30
75 x 75 x 3.0 7.07 80 x 80 x 3.0 7.22
80 x 80 x 3.6 8.59 80 x 80 x 5.0 11.70
80 x 80 x 6.0 13.90 90 x 90 x 3.0 8.01
90 x 90 x 3.6 9.72 90 x 90 x 5.0 13.30
90 x 90 x 6.0 15.76 90 x 90 x 8.0 20.40
100 x 100 x 3.0 8.96 100 x 100 x 4.0 12.00
100 x 100 x 5.0 14.80 100 x 100 x 5.0 14.80
100 x 100 x 6.0 16.19 100 x 100 x 8.0 22.90
100 x 100 x 10 27.90 120 x 120 x 5 18.00
120 x 120 x 6.0 21.30 120 X 120 X 6.3 22.30
120 x 120 x 8.0 27.90 120 x 120 x 10 34.20
120 X 120 X 12 35.8 120 X 120 X 12.5 41.60
140 X 140 X 5.0 21.10 140 X 140 X 6.3 26.30
140 X 140 X 8 32.90 140 X 140 X 10 40.40
140 X 140 X 12.5 49.50 150 X 150 X 5.0 22.70
150 X 150 X 6.3 28.30 150 X 150 X 8.0 35.40
150 X 150 X 10 43.60 150 X 150 X 12.5 53.40
150 X 150 X 16 66.40 150 X 150 X 16 66.40
180 X 180 X 5 27.40 180 X 180 X 6.3 34.20
180 X 180 X 8 43.00 180 X 180 X 10 53.00
180 X 180 X 12.5 65.20 180 X 180 X 16 81.40
200 X 200 X 5 30.50 200 X 200 X 6 35.8
200 x 200 x 6.3 38.2 200 x 200 x 8 48.00
200 x 200 x 10 59.30 200 x 200 x 12.5 73.00
200 x 200 x 16 91.50 250 x 250 x 6.3 48.10
250 x 250 x 8 60.50 250 x 250 x 10 75.00
250 x 250 x 12.5 92.60 250 x 250 x 16 117.00
300 x 300 x 6.3 57.90 300 x 300 x 8 73.10
300 x 300 x 10 57.90 300 x 300 x 8 90.70
300 x 300 x 12.5 112.00 300 x 300 x 16 142.00
350 x 350 x 8 85.70 350 x 350 x 10 106.00
350 x 350 x 12.5 132.00 350 x 350 x 16 167.00
400 x 400 x 10 122.00 400 x 400 x 12 141.00
400 x 400 x 12.5mm 152.00 400 x 400 x 16 192

 

EN 10210 S235JRH Seamless Pipe Chemical Material Composition Of
Carbon Silicon Manganese Phosphorous Sulphur Molybdenum Nickel Chromium Copper Others
max 0.17 – max 1.40 0.045 0.045 – – – – N0.009

 

Mechanical Specification Of EN 10210-1 Grade S235JRH Carbon Steel Seamless Pipes and Tubes
Yield Strength Tensile Strength Elongation A5 min
MPa min ksi min MPa min MPa min ksi min Percentage
340 470 – 26

 

Material Equivalent Properties Of EN 10210-1 Grade S235JRH Pipes
DIN EN BS NFA ASTM ASME
– EN 10210-1 Grade S235JRH – – – –

 

Dimensional Tolerances of EN 10210-1 S235JRH Seamless Tubes
Outer diameter and wall Thickness
Execution Size Range OD Tolerance Wall tolerance
Hot-rolled Tube OD – 80 mmOD > 80 mmWall < 12 mmWall - 12 mm ± 0.4 mm± 0.5 % of OD ± 0.7 mm± (5 % x wallthickness + 0.1 mm
Hot-rolled peeled tube All sizesWall < 12 mmWall - 12 mm + 0.25/- 0 mm ± 0.8 mm± (5 % x wall thickness+ 0.2 mm)
Cold Worked tubecold-rolled or cold-drawn OD < 40 mmOD 40 - 80 mmOD > 80 Wall Thickness< 6 mm Wall Thickness6 - 8 mm Wall Thickness > 8 + 0.30/- 0 mm*+ 0.35/- 0 mm*+ 0.40/- 0 mm* ± 0.30 mm± 0.35 mm± 0.40 mm

 

Standard length tolerances of EN 10210-1 S235JRH Welded Pipe
Component length (mm) OD 30-100 mm OD 100-254 mm
10-100 + 1.0/- 0 + 2.0/- 0
100-600 + 2.0/- 0 + 3.0/- 0
600-1200 + 3.0/- 0 + 4.0/- 0
1200-5000 + 5.0/- 0 + 6.0/- 0

 

What are comon types of S235JRH EN 10219 Carbon Steel Seamless Pipes and Tubes

Pipes

  • Seamless Pipes
  • Cold Drawn Seamless Pipes
  • Hot Drawn Seamless Pipes

Welded Pipes

  • Longitudinally Submerged Arc Welded(LSAW) Pipes
  • Spiral Welded Pipes
  • Double Submerged Arc Welded(DSAW) Pipes
  • Submerged Arc Welded(SAW) Pipes
  • Continous Welded(CW) Pipes
  • Electric Resistance Welded(ERW) Pipes
  • High Frequency Induction(HFI)

Tubes

  • Seamless Tubes
  • Cold Drawn Seamless Tubes
  • Hot Drawn Seamless Tubes

Welded Tubes

  • Double Submerged Arc Welded(DSAW) Tubes
  • Continous Welded(CW) Tubes
  • Electric Resistance Welded(ERW) Tubes
  • Submerged Arc Welded(SAW) Tubes
  • Longitudinally Submerged Arc Welded(LSAW) Tubes
  • Spiral Welded Tubes
  • High Frequency Induction(HFI)

Hollow Sections

Pipes

  • Round Pipes
  • Culvert Pipes
  • Boom Pipe
  • Square Pipes
  • Honed Pipes


Tubes

  • Round Tubes
  • Culvert Tubes
  • Boom Tubes
  • Square Tubes
  • Honed Tubes

Hot Finish EN 10210 S235JRH Square Hollow Section Sizes
Wall Sizes ( O.D.)
.010 1/16" , 1/8" , 3/16"
.020 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8"
.012 1/8"
.016 1/8" , 3/16"
.028 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2"
.035 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.049 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.065 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3"
.083 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3"
.095 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2"
.109 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2"
.120 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3"
.125 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4"
.134 1"
.250 3"
.375 3 1/2"
We Guarantee Fastest Delivery of EN 10210-1 Gr Welded Pipe with All Documents Including Mill Certificate

 

Frequently Used EN 10210-1 Grade S235JRH Pipe
Carbon EN 10210-1 Grade S235JRH Tubes ERW EN 10210-1 S235JRH Tubes CS EN S235JRH Seamless Tubes
Carbon Steel EN S235JRH Pipes EN 10210-1 S235JRH Welded Pipes EN 10210-1 S235JRH Seamless Pipes
EN 10210-1 S235JRH ERW Pipe EN 10210-1 Gr S235JRH LSAW Pipe EN 10210-1 S235JRH DSAW Pipe
S235JRH Fabricated Pipes EN 10210-1 Hydraulic Tubes EN 10210-1 S235JRH Hydraulic Pipes
EN 10210-1 S235JRH Line Pipe S235JRH Carbon Welded Tube EN 10210-1 Seamless Line Pipe
EN 10210-1 S235JRH LSAW Pipe EN 10210-1 Gr S235JRH SAW Tubes EN 10210-1 Grade S235JRH Round Tube

 

are you looking for en 10210-1 coating Pipe Specification, Composition, Wall Thickness and Weight Chart

 

Size chart of EN10210 S235JRH Seamless Pipe
1/8" IPS(.405" O.D.) 3 1/2" IPS( 4.000" O.D.)
SCH 40, 80 SCH 10, 40, 80, 160, XXH
1/4" IPS(.540" O.D.) 4" IPS(4.500" O.D.)
SCH 10, 40, 80 SCH 10, 40, 80, 160, XXH
3/8" IPS(.675" O.D.) 5" IPS( 5.563" O.D.)
SCH 10, 40, 80 SCH 10, 40, 80, 160, XXH
1/2" IPS(.840" O.D.) 6" IPS(6.625" O.D.)
SCH 5, 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
3/4" IPS(1.050" O.D.) 8 ” IPS(8.625" O.D.)
SCH 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
1" IPS:(1.315′ O.D.) 10" IPS(10.750" O.D.)
SCH 5, 10, 40, 80, 160, XXH SCH 10, 20, 40, 80 (.500), TRUE 80(.500)
1-1/4" IPS(1.660" O.D.) 12" IPS(12.750" O.D.)
SCH 10, 40, 80, 160, XXH SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500)
1-1/2" IPS(1.900" O.D.) 14" IPS(14.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH10 (.188), SCH40 (.375)
2" IPS(2.375" O.D.) 16" IPS(16.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH10(.188), SCH40(.375)
2 1/2" IPS(2.875" O.D.) 18" IPS (18.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH-40 (.375)
3" IPS( 3.500" O.D.)
SCH 5, 10, 40, 80, 160, XXH