Manufacturer of EN 10210-1 S275J0H Square Hollow Sections at discounted price
EN 10210-1 Grade S275JOH Pipes and Tubes belong to a specification that cover alloy fine grain steel for various pressure purposes. Multi Metals (India) is a leading manufacturer and supplier of the EN 10210-1 Grade S275JOH Carbon Steel Seamless Pipes and Tubes. The material has 0.2% carbon, manganese, phosphorus and sulfur in the composition with trace elements as well. The EN 10210-1 S275J0H Square Hollow Sections range in minimum tensile strength up to 410MPa and the minimum tensile strength is 560MPa.
The hot finished pipes are for structural hollow sections of non – alloy and tube grain steels. The dimensions range from 10.2mm to 711mm. As one of the leading EN 10210-1 S275JOH Pipe Suppliers we supply these mild steel pipes and tubes in various dimensions. The low cost, low carbon pipes and tubes can range from 1/8 inches to 2 inches with the sizes ranging from ½ inches to 8 inches. The Carbon Steel S275JOH Tube is used in high heat and high pressure applications. There are oil and gas, petroleum, petrochemical and boiler, heat exchanger and power generation plants.
The S275JOH Hot Finished RHS has good corrosion resistance. As a low carbon steel variation, the material transfers heat very well and does not crack under welding heat. However, it is used with filler materials and the preheating methods to avoid the risk. Please contact us for more information on the SHS and CHS Hollow Sections along with the prices.
EN 10210-1 Grade S275JOH Pipes and Tubes Supplier, Before Buy Check EN 10210-1 S275J0H Square Pipe price in India
S275J0H
– block letter "S" means "STEEL FOR STRUCTURAL APPLICATIONS"
– the next figure means the minim. yield value required for wall thickness ≤ 16 mm
– "J0" means impact test value 0° C min. 27 joules
– block letter "H" means "HOLLOW SECTION"
- Dimensional Tolerances : Thickness : (All sizes +/- 10%)
- Type : Seamless/ Welded / ERW
- Length : 6000-14000 mm
- Surface Protection : Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized
- Wall Thickness : 0.5mm - 25mm
- Standard : BS EN 10210 - Hot finished structural hollow sections of non-alloy and fine grain steels
- Nearest Equivalent : DIN 17100 ST44-3U, DIN 17123/4/5 ST44-3U, BS4360 Gr43C, UNI 7806 Fe 430C, NF A 35501 E 28-3, NF A 49501 E 28-3.
- SHS (Square Hollow Sections) Sizes : 20*20mm-400*400mm
- Grade : S275J0H
- Dimension Range : 21.3-914mm
- Packing : In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark
we can help with all EN 10210-1 S275JOH Pipe supply needs. offer Genuine price of Carbon Steel S275JOH Tube
| Carbon | Silicon | Manganese | Phosphorous | Sulphur | Molybdenum | Nickel | Chromium | Copper | Others |
| max 0.20 | – | max 1.50 | 0.04 | 0.04 | – | – | – | – | N0.009 |
| Yield Strength | Tensile Strength | Elongation A5 min | |||
| MPa min | ksi min | MPa min | MPa min | ksi min | Percentage |
| 410 | 560 | – | 22 | ||
| DIN | EN | BS | NFA | ASTM | ASME |
| – | EN 10210-1 Grade S275JOH | – | – | – | – |
| Component length (mm) | OD 30-100 mm | OD 100-254 mm |
| 10-100 | + 1.0/- 0 | + 2.0/- 0 |
| 100-600 | + 2.0/- 0 | + 3.0/- 0 |
| 600-1200 | + 3.0/- 0 | + 4.0/- 0 |
| 1200-5000 | + 5.0/- 0 | + 6.0/- 0 |
| Outer diameter and wall Thickness | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Execution | Size Range | OD Tolerance | Wall tolerance | ||||||
| Hot-rolled Tube | OD – 80 mmOD > 80 mmWall < 12 mmWall - 12 mm | ± 0.4 mm± 0.5 % of OD | ± 0.7 mm± (5 % x wallthickness + 0.1 mm | ||||||
| Hot-rolled peeled tube | All sizesWall < 12 mmWall - 12 mm | + 0.25/- 0 mm | ± 0.8 mm± (5 % x wall thickness+ 0.2 mm) | ||||||
| Cold Worked tubecold-rolled or cold-drawn | OD < 40 mmOD 40 - 80 mmOD > 80 Wall Thickness< 6 mm Wall Thickness6 - 8 mm Wall Thickness > 8 | + 0.30/- 0 mm*+ 0.35/- 0 mm*+ 0.40/- 0 mm* | ± 0.30 mm± 0.35 mm± 0.40 mm | ||||||
| Wall | Sizes ( O.D.) |
|---|---|
| .010 | 1/16" , 1/8" , 3/16" |
| .020 | 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8" |
| .012 | 1/8" |
| .016 | 1/8" , 3/16" |
| .028 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2" |
| .035 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
| .049 | 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
| .065 | 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3" |
| .083 | 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3" |
| .095 | 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2" |
| .109 | 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2" |
| .120 | 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3" |
| .125 | 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4" |
| .134 | 1" |
| .250 | 3" |
| .375 | 3 1/2" |
Check EN 10210-1 S275JOH Tubing Specification, Chemical Composition and Mechanical Properties chart online
| Carbon EN 10210-1 Grade S275JOH Tubes | ERW EN 10210-1 S275JOH Tubes | CS EN S275JOH Seamless Tubes |
| Carbon Steel EN S275JOH Pipes | EN 10210-1 S275JOH Welded Pipes | EN 10210-1 S275JOH Seamless Pipes |
| EN 10210-1 S275JOH ERW Pipe | EN 10210-1 Gr S275JOH LSAW Pipe | EN 10210-1 S275JOH DSAW Pipe |
| S275JOH Fabricated Pipes | EN 10210-1 Hydraulic Tubes | EN 10210-1 S275JOH Hydraulic Pipes |
| EN 10210-1 S275JOH Line Pipe | S275JOH Carbon Welded Tube | EN 10210-1 Seamless Line Pipe |
| EN 10210-1 S275JOH LSAW Pipe | EN 10210-1 Gr S275JOH SAW Tubes | EN 10210-1 Grade S275JOH Round Tube |
Cut to size SHS and CHS Hollow Sections at lowest price in Mumbai
| 1/8" IPS(.405" O.D.) | 3 1/2" IPS( 4.000" O.D.) |
|---|---|
| SCH 40, 80 | SCH 10, 40, 80, 160, XXH |
| 1/4" IPS(.540" O.D.) | 4" IPS(4.500" O.D.) |
| SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
| 3/8" IPS(.675" O.D.) | 5" IPS( 5.563" O.D.) |
| SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
| 1/2" IPS(.840" O.D.) | 6" IPS(6.625" O.D.) |
| SCH 5, 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
| 3/4" IPS(1.050" O.D.) | 8 ” IPS(8.625" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
| 1" IPS:(1.315′ O.D.) | 10" IPS(10.750" O.D.) |
| SCH 5, 10, 40, 80, 160, XXH | SCH 10, 20, 40, 80 (.500), TRUE 80(.500) |
| 1-1/4" IPS(1.660" O.D.) | 12" IPS(12.750" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500) |
| 1-1/2" IPS(1.900" O.D.) | 14" IPS(14.000" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH10 (.188), SCH40 (.375) |
| 2" IPS(2.375" O.D.) | 16" IPS(16.000" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH10(.188), SCH40(.375) |
| 2 1/2" IPS(2.875" O.D.) | 18" IPS (18.000" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH-40 (.375) |
| 3" IPS( 3.500" O.D.) | |
| SCH 5, 10, 40, 80, 160, XXH |
Pipes
Welded Pipes
|
Tubes
Welded Tubes
|
Hollow Sections Pipes
|