Suppliers and manufacturer of EN 10210-1 Grade S355NH Pipes and Tubes with Exceptional sizes, standard, and Quality
EN 10210-1 Grade S355NH Pipes and Tubes are made up of the seamless mild carbon material. There are also welded and electric resistance welded pipe types. Multi Metals (India) is a manufacturer and supplier of the EN 10210-1 Grade S355NH Pipes in various scales and types. These are low cost, low carbon steels. They are very much cost effective and that is the primary reason for the widespread use of the EN 10210-1 Grade S355NH hot finished tube.
The material has 0.2% carbon, 1.6% manganese, silicon, phosphorus and sulfur in the content. This material makeup gives the pipes 355MPa minimum yield strength and 630MPa minimum tensile strength. There are hollow sections that are annealed and heat treated in addition to the EN 10210-1 Grade S355NH Carbon Steel Seamless Pipes and Tubes. The applications include high strength, high corrosive, high temperature and high pressure applications such as the oil and gas industries, petroleum industries, structural engineering and in construction types.
The EN 10210-1 S355NH Seamless Tubes can be joint to other parts and components via threading or welding. Please feel free to contact us for more information, pricing and the different types such as the EN 10210-1 S355NH Welded Pipe and seamless pipe types.
Always check EN 10210-1 Grade S355NH Pipes thickness and weight before buying material
Grade Standard And Specification Of EN 10210-1 Grade S355NH Pipes and Tubes
- Type : Seamless/ Welded / ERW
- SHS (Square Hollow Sections) Sizes : 20*20mm-400*400mm
- Grade : S355NH
- Length : 6000-14000 mm
- Dimensional Tolerances : Thickness : (All sizes +/- 10%)
- Standard : BS EN 10210 - Hot finished structural hollow sections of non-alloy and fine grain steels
- Surface Protection : Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized
- Dimension Range : 21.3-914mm
- Packing : In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark
- Wall Thickness : 0.5mm - 25mm
- Condition: BKS, NBK,BK ,BKW, GBK(+A), NBK(+N), BK(+C)
- End: Plain / Beveled / Vanished / Plastic Caps
- Inspection: SGS, BV Etc.
- Rolling type: Hot formed RHS,Hot finished RHS
Standard length tolerances of EN 10210-1 Grade S355NH Pipes
| Component length (mm) | OD 30-100 mm | OD 100-254 mm |
| 10-100 | + 1.0/- 0 | + 2.0/- 0 |
| 100-600 | + 2.0/- 0 | + 3.0/- 0 |
| 600-1200 | + 3.0/- 0 | + 4.0/- 0 |
| 1200-5000 | + 5.0/- 0 | + 6.0/- 0 |
Dimensional Tolerances of EN 10210-1 Grade S355NH hot finished tube
| Outer diameter and wall Thickness | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Execution | Size Range | OD Tolerance | Wall tolerance | ||||||
| Hot-rolled Tube | OD – 80 mmOD > 80 mmWall < 12 mmWall - 12 mm | ± 0.4 mm± 0.5 % of OD | ± 0.7 mm± (5 % x wallthickness + 0.1 mm | ||||||
| Hot-rolled peeled tube | All sizesWall < 12 mmWall - 12 mm | + 0.25/- 0 mm | ± 0.8 mm± (5 % x wall thickness+ 0.2 mm) | ||||||
| Cold Worked tubecold-rolled or cold-drawn | OD < 40 mmOD 40 - 80 mmOD > 80 Wall Thickness< 6 mm Wall Thickness6 - 8 mm Wall Thickness > 8 | + 0.30/- 0 mm*+ 0.35/- 0 mm*+ 0.40/- 0 mm* | ± 0.30 mm± 0.35 mm± 0.40 mm | ||||||
EN 10210-1 Grade S355NH Carbon Steel Seamless Pipes and Tubes
Mechanical Characteristics
| Yield Strength | Tensile Strength | Elongation A5 min | |||
| MPa min | ksi min | MPa min | MPa min | ksi min | Percentage |
| 470 | 630 | – | 22 | ||
Chemical Composition Chart Of EN 10210-1 Grade S355NH Pipes
| Carbon | Silicon | Manganese | Phosphorous | Sulphur | Molybdenum | Nickel | Chromium | Copper | Others |
| max 0.20 | max 0.50 | 0.90-1.65 | 0.035 | 0.03 | max 0.10 | max 0.50 | max 0.30 | max 0.35 | V max 0.05 Al min 0.020 Nb max 0.05 Ti max 0.03 |
Equivalent Material Grade Of EN 10210-1 S355NH Seamless Tubes
| DIN | EN | BS | NFA | ASTM | ASME |
| DIN -17124 Grade FGS 36 | EN 10210-1 Grade S355NH | NFA 49-501 Grade TU E355 | ASTM A 500 Grade C | ASME SA 500 Grade C | – |
If you need EN 10210-1 S355NH Welded Pipe We can supply in nearly any size, no matter how small the size or quantity.
Sizes range of S355NH Carbon Tubes
| Wall | Sizes ( O.D.) |
|---|---|
| .010 | 1/16" , 1/8" , 3/16" |
| .020 | 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8" |
| .012 | 1/8" |
| .016 | 1/8" , 3/16" |
| .028 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2" |
| .035 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
| .049 | 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
| .065 | 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3" |
| .083 | 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3" |
| .095 | 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2" |
| .109 | 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2" |
| .120 | 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3" |
| .125 | 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4" |
| .134 | 1" |
| .250 | 3" |
| .375 | 3 1/2" |
material of EN 10210-1 S355NH Welded Pipe
- Carbon Steel
- Alloy Steel
- Low Temperature Carbon Steel
- High Temperature Carbon Steel
- Low Temperature Alloy Steel
- High Temperature Alloy Steel
Most Common Types Of EN 10210-1 Grade S355NH Line Pipes
| Carbon EN 10210-1 Grade S355NH Tubes | ERW EN 10210-1 S355NH Tubes | CS ENS355NH Seamless Tubes |
| Carbon Steel EN S355NH Pipes | EN 10210-1 S355NH Welded Pipes | EN 10210-1 S355NH Seamless Pipes |
| EN 10210-1 S355NH ERW Pipe | EN 10210-1 Gr S355NH LSAW Pipe | EN 10210-1 S355NH DSAW Pipe |
| S355NH Fabricated Pipes | EN 10210-1 Hydraulic Tubes | EN 10210-1 S355NH Hydraulic Pipes |
| EN 10210-1 S355NH Line Pipe | S355NH Carbon Welded Tube | EN 10210-1 Seamless Line Pipe |
| EN 10210-1 S355NH LSAW Pipe | EN 10210-1 Gr S355NH SAW Tubes | EN 10210-1 Grade S355NH Round Tube |
We have a large inventory of EN 10210-1 S355NH Seamless Tubes in almost all length, call us to know more about Ready stock and updated price list
Carbon EN 10210-1 Grade S355NH Fabricated Pipes
Size chart
| 1/8" IPS(.405" O.D.) | 3 1/2" IPS( 4.000" O.D.) |
|---|---|
| SCH 40, 80 | SCH 10, 40, 80, 160, XXH |
| 1/4" IPS(.540" O.D.) | 4" IPS(4.500" O.D.) |
| SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
| 3/8" IPS(.675" O.D.) | 5" IPS( 5.563" O.D.) |
| SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
| 1/2" IPS(.840" O.D.) | 6" IPS(6.625" O.D.) |
| SCH 5, 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
| 3/4" IPS(1.050" O.D.) | 8 ” IPS(8.625" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
| 1" IPS:(1.315′ O.D.) | 10" IPS(10.750" O.D.) |
| SCH 5, 10, 40, 80, 160, XXH | SCH 10, 20, 40, 80 (.500), TRUE 80(.500) |
| 1-1/4" IPS(1.660" O.D.) | 12" IPS(12.750" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500) |
| 1-1/2" IPS(1.900" O.D.) | 14" IPS(14.000" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH10 (.188), SCH40 (.375) |
| 2" IPS(2.375" O.D.) | 16" IPS(16.000" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH10(.188), SCH40(.375) |
| 2 1/2" IPS(2.875" O.D.) | 18" IPS (18.000" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH-40 (.375) |
| 3" IPS( 3.500" O.D.) | |
| SCH 5, 10, 40, 80, 160, XXH |
find here EN S355NH Hydraulic Tubes Material Composition, specification and dimensions table