Suppliers and manufacturer of EN 10210-1 Grade S355NLH Pipes and Tubes with Exceptional sizes, standard, and Quality
EN 10210-1 Grade S355NLH Pipes and Tubes have high operating temperatures and are used for pressure purposes. The low carbon content makes it easy for welding. Multi Metals (India) is a leading manufacturer of the EN 10210-1 Grade S355NLH Carbon Steel Seamless Pipes and Tubes in various dimensions and sizes. The welding procedures of the pipes in this specification can include filler materials and preheating.
However, the low carbon content and the high thermal conductivity of the EN 10210-1 GRADE S355NLH SPECIFICATION makes the pipes to be welded with most conventional welding methods without preheating or the need for post weld heat treatment. There are different finishes to the pipes such as the EN 10210-1 Grade S355NLH hot finished tube which acts as an additional corrosion resistant capacity because of the finish. The pipes can range in diameters from 10.2mm to 1219mm and the wall thicknesses vary up to 4mm with different pressure capacities.
As a leading EN 10210-1 Grade S355NLH Pipes Manufacturer we produce the pipes in seamless, welded, ERW and other forms. The material composition has 0.23% carbon with silicon, manganese, phosphorus and sulfur. This specific combination provides the EN 10210-1 S355NLH Seamless Tubes with 355MPa minimum yield strength and 470MPa minimum tensile strength. Please feel free to contact us for more information on the EN 10210-1 S355NLH Welded Pipe and other products.
Always check EN 10210-1 Grade S355NLH Pipes thickness and weight before buying material
| Component length (mm) | OD 30-100 mm | OD 100-254 mm |
| 10-100 | + 1.0/- 0 | + 2.0/- 0 |
| 100-600 | + 2.0/- 0 | + 3.0/- 0 |
| 600-1200 | + 3.0/- 0 | + 4.0/- 0 |
| 1200-5000 | + 5.0/- 0 | + 6.0/- 0 |
| Outer diameter and wall Thickness | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Execution | Size Range | OD Tolerance | Wall tolerance | ||||||
| Hot-rolled Tube | OD – 80 mmOD > 80 mmWall < 12 mmWall - 12 mm | ± 0.4 mm± 0.5 % of OD | ± 0.7 mm± (5 % x wallthickness + 0.1 mm | ||||||
| Hot-rolled peeled tube | All sizesWall < 12 mmWall - 12 mm | + 0.25/- 0 mm | ± 0.8 mm± (5 % x wall thickness+ 0.2 mm) | ||||||
| Cold Worked tubecold-rolled or cold-drawn | OD < 40 mmOD 40 - 80 mmOD > 80 Wall Thickness< 6 mm Wall Thickness6 - 8 mm Wall Thickness > 8 | + 0.30/- 0 mm*+ 0.35/- 0 mm*+ 0.40/- 0 mm* | ± 0.30 mm± 0.35 mm± 0.40 mm | ||||||
- Type : Seamless/ Welded / ERW
- SHS (Square Hollow Sections) Sizes : 20*20mm-400*400mm
- Grade : S355NLH
- Length : 6000-14000 mm
- Dimensional Tolerances : Thickness : (All sizes +/- 10%)
- Standard : BS EN 10210 - Hot finished structural hollow sections of non-alloy and fine grain steels
- Surface Protection : Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized
- Dimension Range : 21.3-914mm
- Packing : In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark
- Wall Thickness : 0.5mm - 25mm
- Condition: BKS, NBK,BK ,BKW, GBK(+A), NBK(+N), BK(+C)
- End: Plain / Beveled / Vanished / Plastic Caps
- Inspection: SGS, BV Etc.
- Rolling type: Hot formed RHS,Hot finished RHS
If you need EN 10210-1 S355NLH Seamless Tubes We can supply in nearly any size, no matter how small the size or quantity.
| 1/8" IPS(.405" O.D.) | 3 1/2" IPS( 4.000" O.D.) |
|---|---|
| SCH 40, 80 | SCH 10, 40, 80, 160, XXH |
| 1/4" IPS(.540" O.D.) | 4" IPS(4.500" O.D.) |
| SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
| 3/8" IPS(.675" O.D.) | 5" IPS( 5.563" O.D.) |
| SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
| 1/2" IPS(.840" O.D.) | 6" IPS(6.625" O.D.) |
| SCH 5, 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
| 3/4" IPS(1.050" O.D.) | 8 ” IPS(8.625" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
| 1" IPS:(1.315′ O.D.) | 10" IPS(10.750" O.D.) |
| SCH 5, 10, 40, 80, 160, XXH | SCH 10, 20, 40, 80 (.500), TRUE 80(.500) |
| 1-1/4" IPS(1.660" O.D.) | 12" IPS(12.750" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500) |
| 1-1/2" IPS(1.900" O.D.) | 14" IPS(14.000" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH10 (.188), SCH40 (.375) |
| 2" IPS(2.375" O.D.) | 16" IPS(16.000" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH10(.188), SCH40(.375) |
| 2 1/2" IPS(2.875" O.D.) | 18" IPS (18.000" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH-40 (.375) |
| 3" IPS( 3.500" O.D.) | |
| SCH 5, 10, 40, 80, 160, XXH |
| DIN | EN | BS | NFA | ASTM | ASME |
| DIN -17124 Grade FGS 36 | EN 10210-1 Grade S355NH | NFA 49-501 Grade TU E355 | ASTM A 500 Grade C | ASME SA 500 Grade C | – |
| Yield Strength | Tensile Strength | Elongation A5 min | |||
| MPa min | ksi min | MPa min | MPa min | ksi min | Percentage |
| 470 | 630 | – | 22 | ||
| Carbon | Silicon | Manganese | Phosphorous | Sulphur | Molybdenum | Nickel | Chromium | Copper | Others |
| max 0.20 | max 0.50 | 0.90-1.65 | 0.035 | 0.03 | max 0.10 | max 0.50 | max 0.30 | max 0.35 | V max 0.05 Al min 0.020 Nb max 0.05 Ti max 0.03 |
| Carbon EN 10210-1 Grade S355NLH Tubes | ERW EN 10210-1 S355NLH Tubes | CS ENS355NLH Seamless Tubes |
| Carbon Steel EN S355NLH Pipes | EN 10210-1 S355NLH Welded Pipes | EN 10210-1 S355NLH Seamless Pipes |
| EN 10210-1 S355NLH ERW Pipe | EN 10210-1 Gr S355NLH LSAW Pipe | EN 10210-1 S355NLH DSAW Pipe |
| S355NLH Fabricated Pipes | EN 10210-1 Hydraulic Tubes | EN 10210-1 S355NLH Hydraulic Pipes |
| EN 10210-1 S355NLH Line Pipe | S355NLH Carbon Welded Tube | EN 10210-1 Seamless Line Pipe |
| EN 10210-1 S355NLH LSAW Pipe | EN 10210-1 Gr S355NLH SAW Tubes | EN 10210-1 Grade S355NLH Round Tube |
| Wall | Sizes ( O.D.) |
|---|---|
| .010 | 1/16" , 1/8" , 3/16" |
| .020 | 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8" |
| .012 | 1/8" |
| .016 | 1/8" , 3/16" |
| .028 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2" |
| .035 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
| .049 | 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
| .065 | 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3" |
| .083 | 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3" |
| .095 | 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2" |
| .109 | 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2" |
| .120 | 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3" |
| .125 | 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4" |
| .134 | 1" |
| .250 | 3" |
| .375 | 3 1/2" |
We have a large inventory of EN 10210-1 S355NLH Welded Pipe in almost all length, call us to know more about Ready stock and updated price list
- Carbon Steel
- Alloy Steel
- Low Temperature Carbon Steel
- High Temperature Carbon Steel
- Low Temperature Alloy Steel
- High Temperature Alloy Steel
find here En 10210-1 S355nlh 1.0549 Cold Drawn Steel Tube Material Composition, specification and dimensions table