inquiry@multimetalsindia.com
+91 9819615309

EN 10210-1 Grade S460NH Carbon Steel Seamless Pipe & Hot Finished Tubes

Home EN 10210-1 Grade S460NH Carbon Steel Seamless Pipe & Hot Finished Tubes
EN 10210-1 Grade S460NH Carbon Steel Seamless Pipe & Hot Finished Tubes

EN 10210-1 Grade S460NH Pipes and Tubes Manufacturer in india in custom length

EN 10210-1 Grade S460NH Pipes and Tubes range in diameters from 21.3mm to 1219mm and the wall thicknesses of the pipes range from 10.2mm to 40mm. The material of the EN 10210-1 GRADE S460NH SPECIFICATION has carbon, silicon, manganese, phosphorus and sulfur. The material has 550MPa minimum yield strength and the minimum tensile strength is 720MPa.

Multi Metals (India) is a manufacturer and supplier of the EN 10210-1 Grade S460NH Carbon Steel Seamless Pipes and Tubes in large quantities to a wide audience. There are seamless and welded pipe types along with the ERW, EFW and fabricated ones. The EN 10210-1 Grade S460NH hot finished tubes are used in oil and gas, marine, petroleum, petrochemical, heat exchanger and in power generation applications. The material is highly thermally conductive and has the advantage of being welded under high temperatures without cracking.

Appropriate filler materials for the EN 10210-1 S460NH Seamless Tubes when applied with preheating make the welding procedure smooth. The material is can be hardened by carburizing procedures and heat treatment methods are also available. The use of these materials is mainly due to the low cost and long lasting lifespan. Please feel free to contact us for more information on the EN 10210-1 S460NH Welded Pipe products and pricing.

 

Suppliers of EN 10210-1 Grade S460NH Pipes, Check sizes & updated price list of S460NH Carbon Tubes

 

Typical Mechanical Property Ranges Of Carbon EN 10210-1 Grade S275NH Fabricated Pipes
Yield Strength Tensile Strength Elongation A5 min
MPa min ksi min MPa min MPa min ksi min Percentage
550 720 – 17


Chemical Compatibility Chart Of EN S275NH Hydraulic Tubes
Carbon Silicon Manganese Phosphorous Sulphur Molybdenum Nickel Chromium Copper Others
max 0.20 max 0.60 1.00-1.70 0.035 0.03 max 0.10 max 0.80 max 0.30 max 0.70 V max 0.05 Al min 0.020 Nb max 0.05 Ti max 0.03

 

Equivalent Properties of S275NH Carbon Tubes
DIN EN BS NFA ASTM ASME
DIN (17123/24/25) Grade FGS 47 EN 10210-1 Grade S460NH NFA A 36-2011) Grade E 460 R+FP ASTM A 678 Grade C ASME SA 678 Grade C –

 

Analysis Specification Of EN 10210-1 Grade S460NH Pipes and Tubes
  • Type : Seamless/ Welded / ERW
  • SHS (Square Hollow Sections) Sizes : 20*20mm-400*400mm
  • Grade : S460NH
  • Length : 6000-14000 mm
  • Dimensional Tolerances : Thickness : (All sizes +/- 10%)
  • Standard : BS EN 10210 - Hot finished structural hollow sections of non-alloy and fine grain steels
  • Surface Protection : Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized
  • Dimension Range : 21.3-914mm
  • Packing : In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark
  • Wall Thickness : 0.5mm - 25mm

 

 Grade :     S460NH
    Number:     1.8953
    Classification:     Structural steel
    Standard:
    EN 10210-1: 2006 Hot finished structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements
    EN 10219-1: 2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements


Specialized in EN 10210-1 S460NH Welded Pipe, Check EN 10210-1 grade S460NH Specification

 

Size chart of EN 10210-1 Grade S460NH Carbon Steel Seamless Pipes and Tubes
1/8" IPS(.405" O.D.) 3 1/2" IPS( 4.000" O.D.)
SCH 40, 80 SCH 10, 40, 80, 160, XXH
1/4" IPS(.540" O.D.) 4" IPS(4.500" O.D.)
SCH 10, 40, 80 SCH 10, 40, 80, 160, XXH
3/8" IPS(.675" O.D.) 5" IPS( 5.563" O.D.)
SCH 10, 40, 80 SCH 10, 40, 80, 160, XXH
1/2" IPS(.840" O.D.) 6" IPS(6.625" O.D.)
SCH 5, 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
3/4" IPS(1.050" O.D.) 8 ” IPS(8.625" O.D.)
SCH 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
1" IPS:(1.315′ O.D.) 10" IPS(10.750" O.D.)
SCH 5, 10, 40, 80, 160, XXH SCH 10, 20, 40, 80 (.500), TRUE 80(.500)
1-1/4" IPS(1.660" O.D.) 12" IPS(12.750" O.D.)
SCH 10, 40, 80, 160, XXH SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500)
1-1/2" IPS(1.900" O.D.) 14" IPS(14.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH10 (.188), SCH40 (.375)
2" IPS(2.375" O.D.) 16" IPS(16.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH10(.188), SCH40(.375)
2 1/2" IPS(2.875" O.D.) 18" IPS (18.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH-40 (.375)
3" IPS( 3.500" O.D.)
SCH 5, 10, 40, 80, 160, XXH

 

material of EN 10210-1 Grade S460NH hot finished tubes
  • Carbon Steel
  • Alloy Steel
  • Low Temperature Carbon Steel
  • High Temperature Carbon Steel
  • Low Temperature Alloy Steel
  • High Temperature Alloy Steel


EN 10210-1 Grade S460NH Pipe Standard length tolerances
Component length (mm) OD 30-100 mm OD 100-254 mm
10-100 + 1.0/- 0 + 2.0/- 0
100-600 + 2.0/- 0 + 3.0/- 0
600-1200 + 3.0/- 0 + 4.0/- 0
1200-5000 + 5.0/- 0 + 6.0/- 0


Dimensional Tolerances of EN 10210-1 S460NH Seamless Tubes
Outer diameter and wall Thickness
Execution Size Range OD Tolerance Wall tolerance
Hot-rolled Tube OD – 80 mmOD > 80 mmWall < 12 mmWall - 12 mm ± 0.4 mm± 0.5 % of OD ± 0.7 mm± (5 % x wallthickness + 0.1 mm
Hot-rolled peeled tube All sizesWall < 12 mmWall - 12 mm + 0.25/- 0 mm ± 0.8 mm± (5 % x wall thickness+ 0.2 mm)
Cold Worked tubecold-rolled or cold-drawn OD < 40 mmOD 40 - 80 mmOD > 80 Wall Thickness< 6 mm Wall Thickness6 - 8 mm Wall Thickness > 8 + 0.30/- 0 mm*+ 0.35/- 0 mm*+ 0.40/- 0 mm* ± 0.30 mm± 0.35 mm± 0.40 mm

 

Sizes range of EN 10210-1 S460NH Welded Pipe
Wall Sizes ( O.D.)
.010 1/16" , 1/8" , 3/16"
.020 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8"
.012 1/8"
.016 1/8" , 3/16"
.028 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2"
.035 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.049 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.065 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3"
.083 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3"
.095 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2"
.109 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2"
.120 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3"
.125 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4"
.134 1"
.250 3"
.375 3 1/2"

 

Find your choice of sizes from our EN 10210-1 S460NH Seamless Tubes stock, available in types of round, rectangular and square Tube

 

Most Commonly Used S460NH Carbon Tubes
Carbon EN 10210-1 Grade S460NH Tubes ERW EN 10210-1 S460NH Tubes CS ENS460NH Seamless Tubes
Carbon Steel EN S460NH Pipes EN 10210-1 S460NH Welded Pipes EN 10210-1 S460NH Seamless Pipes
EN 10210-1 S460NH ERW Pipe EN 10210-1 Gr S460NH LSAW Pipe EN 10210-1 S460NH DSAW Pipe
S460NH Fabricated Pipes EN 10210-1 Hydraulic Tubes EN 10210-1 S460NH Hydraulic Pipes
EN 10210-1 S460NH Line Pipe S460NH Carbon Welded Tube EN 10210-1 Seamless Line Pipe
EN 10210-1 S460NH LSAW Pipe EN 10210-1 Gr S460NH SAW Tubes EN 10210-1 Grade S460NH Round Tube

 

Get complete information about EN S460NH Hydraulic Tubes Material Composition, Equivalent, specification chart online