EN 10255 Hot Dipped Galvanized Steel Tube manufacturer in india, EN 10255 Tubes stock at best price
EN 10255 Threaded Steel Tubes are made up of a low carbon steel with 0.2% carbon, 1.4% manganese, phosphorus and sulfur. Multi Metals (India) is a leading manufacturer and supplier of the EN 10255 Tubes Specification in various dimensions. The material has 320MPa minimum yield strength and 520MPa minimum tensile strength. There are different coatings such as hot dipped galvanized for the non – alloy steel tubes. These can be welded or threaded for connection. The EN 10255 - Non-alloy steel tubes can be seamless or welded.
There are different shapes, types and sizes of these pipes. These are used in applications that are suitable for welding and threading together. The tubes range in outer diameters from 10.2mm to 165.1mm and thread sizes ranging from 1/8 inches to 6 inches and in two series. The series of the EN 10255 Hot Dipped Galvanized Steel Tube are medium and heavy series. The thicknesses of the tubes range in three different categories. There are different forms such as round, rectangular, square and hydraulic forms. The length of the pipes can range from single random, double random to standard and custom cut to length sizes.
The 10255 Non-Alloy Steel Tube is used in oil and gas, petroleum, petrochemical and various mechanical and structural applications. The pipes can also be plain ended or beveled ended in addition to being threaded ends. The BS EN 10255 Pipe Standard mandates the pipes to have different wall thicknesses, diameters and schedules ranging from sch5 through XXS. Please feel free to contact us for more information on the BS EN 10255 seam Welded Steel Pipes and other types and the prices.
BS EN 10255 Pipe available according to international standards and specifications
| Nominal bore | Outside diameter | Thickness | Weight | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Light | Medium/ Heavy | Light | Medium | Heavy | Light | Medium | Heavy | ||
| in | mm | mm | mm | mm | mm | mm | kg/m | kg/m | kg/m |
| 1/4 | 8 | 13.6 | 13.9 | 1.80 | 2.3 | 2.9 | 0.515 | 0.641 | 0.765 |
| 3/8 | 10 | 17.1 | 17.4 | 1.80 | 2.3 | 2.9 | 0.670 | 0.839 | 1.020 |
| 1/2 | 15 | 21.4 | 21.7 | 2.00 | 2.6 | 3.2 | 0.947 | 1.210 | 1.440 |
| 3/4 | 20 | 26.9 | 27.2 | 2.30 | 2.6 | 3.2 | 1.380 | 1.560 | 1.870 |
| 1 | 25 | 33.8 | 34.2 | 2.60 | 3.2 | 4.0 | 1.980 | 2.410 | 2.940 |
| 1 1/4 | 32 | 42.5 | 42.9 | 2.60 | 3.2 | 4.0 | 2.540 | 3.100 | 3.800 |
| 1 1/2 | 40 | 48.4 | 48.8 | 2.90 | 3.2 | 4.0 | 3.230 | 3.570 | 4.380 |
| 2 | 50 | 60.2 | 60.8 | 2.90 | 3.6 | 4.5 | 4.080 | 5.030 | 6.190 |
| 2 1/2 | 65 | 76.0 | 76.6 | 3.20 | 3.6 | 4.5 | 5.710 | 6.430 | 7.930 |
| 3 | 80 | 88.7 | 89.5 | 3.20 | 4.0 | 5.0 | 6.720 | 8.370 | 10.300 |
| 4 | 100 | 113.9 | 114.9 | 3.60 | 4.5 | 5.4 | 9.750 | 12.200 | 14.500 |
| 5 | 125 | 140.6 | 5.0 | 5.4 | 16.600 | 17.900 | |||
| 6 | 150 | 165.1 | 5.0 | 5.4 | 19.700 | 21.300 | |||
| Carbon EN 10255 Type L series steel Tube Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
|---|---|
| EN 10255 Carbon Steel EFW Pipe size | 5.0 mm – 1219.2 mm |
| Standard | AISI, DIN, EN, GB, IS, JIS, ASTM, ASME Pipe |
| EN 10255 Grade S195T Carbon Steel Welded Pipe Size | 5.0 mm – 1219.2 mm |
| EN 10255+a1 Length | Single Random, Double Random, Standard & Cut length Pipe & Tube |
| IS EN 10255 Grade S195T Seamless Pipe Size | 4 to 219mm W. T.: 0.5 to 20mm |
| Carbon EN 10255 Non-alloy steel Pipe Schedule | SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| Carbon Steel EN 10255 Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| Carbon EN 10255 Type L series steel Welded Tube Size | 6.35 mm OD To 152 mm OD |
| CS EN 10255 DIN 2440 Form | Round, Hydraulic, ‘U’ bent or Hollow,LSAW, Boiler, Straight Pipe, Clad Pipe, Rectangular, Square Pipe Etc |
| Manufacturers of Carbon Steel EN 10255-m Pipe |
|
| EN 10255 L1 series steel Tube wall thickness | 0.020" –0.220", (special wall thicknesses available) |
| EN 10255 Carbon Steel Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
| EN ISO 10255 Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
| EN 10255 steel Seamless Tube Size | 3.35 mm OD To 101.6 mm OD |
| EN 10255 L2 series steel End | Plain End, Beveled End, Treaded Pipe & Tube |
| Carbon Steel EN 10255-m Application | Oil Pipe & Tube, Gas Pipe & Tube, Fluid Pipe & Tube, Boiler Pipe & Tube, Heat exchanger Tube |
| EN 10255 steel grade s195t Specialize in |
|
| EN 10255 Grade S195T Carbon Steel Type | Welded, Seamless, ERW, EFW, Fabricated Pipe, ‘U’ bent or Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Tube etc |
| IS EN 10255 Grade S195T Marking | All EN 10255 Hot Dipped Galvanized Steel Tube are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
| Material Test Certificates (MTC) | Material Test Certificates (MTC) as per EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2, 100% Radiography Test Report, Raw Materials Certificate, Third Party Inspection Report, Fumigation Certificates, Heat Treatment Charts, CS EN 10255 DIN 2440 Pipe HS Code Commercial Invoice, Form A for Generalized System of Preferences (GSP) |
| EN 10255 L |
| EN 10255 L1 |
| EN 10255 L2 |
| EN 10255 Medium |
| EN 10255 Heavy |
EN 10255 – on-Alloy steel tubes suitable for welding and threading
- EN 10255-M – medium heavy construction (in the past DIN 2440)
- EN 10255-H – heavy construction (in the past DIN 2441)
BS EN 10255 Seam Welded Steel Pipes Suppliers, Before Buy Check EN 10255 Non-Alloy Steel Tube price in India
Steel Grade |
Chemical composition % |
||||
Steel Name |
Steel Number |
C |
Mn |
P |
S |
max |
max |
max |
max |
||
S195T |
1.0026 |
0,20 |
1,40 |
0,035 |
0,030 |
Mechanical Properties |
||
Upper Yield strength |
Tensile strength |
Elongation |
ReH min. (MPa) |
Rm (MPa) |
A min. % |
195 |
320 to 520 |
20 |
| DIN | EN | BS | NFA | ASTM | ASME |
|---|---|---|---|---|---|
| – | EN 10255 Grade S195T | – | – | – | – |
| DN | Zoll | d | s | Kg/m | ||
| schwarz/ black |
verzinkt/ galvanized |
|||||
| 8 | 1/4 | 13,5 | 2,35 | 0,65 | 0,68 | |
| 10 | 3/8 | 17,2 | 2,35 | 0,85 | 0,89 | |
| 15 | 1/2 | 21,3 | 2,65 | 1,22 | 1,27 | |
| 20 | 3/4 | 26,9 | 2,65 | 1,58 | 1,65 | |
| 25 | 1 | 33,7 | 3,25 | 2,44 | 2,55 | |
| 32 | 1 1/4 | 42,4 | 3,25 | 3,14 | 3,28 | |
| 40 | 1 1/2 | 48,3 | 3,25 | 3,61 | 3,77 | |
| 50 | 2 | 60,3 | 3,65 | 5,10 | 5,33 | |
| 65 | 21/2 | 76,1 | 3,65 | 6,51 | 6,80 | |
| 80 | 3 | 88,9 | 4,05 | 8,47 | 8,85 | |
| 100 | 4 | 114,3 | 4,5 | 12,10 | 12,64 | |
we can help with all EN 10255 Hot Dipped Galvanized Steel Tube need, check 10255 grade s195t Tube specification
| 1/8" IPS(.405" O.D.) | 3 1/2" IPS( 4.000" O.D.) |
|---|---|
| SCH 40, 80 | SCH 10, 40, 80, 160, XXH |
| 1/4" IPS(.540" O.D.) | 4" IPS(4.500" O.D.) |
| SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
| 3/8" IPS(.675" O.D.) | 5" IPS( 5.563" O.D.) |
| SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
| 1/2" IPS(.840" O.D.) | 6" IPS(6.625" O.D.) |
| SCH 5, 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
| 3/4" IPS(1.050" O.D.) | 8 ” IPS(8.625" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
| 1" IPS:(1.315′ O.D.) | 10" IPS(10.750" O.D.) |
| SCH 5, 10, 40, 80, 160, XXH | SCH 10, 20, 40, 80 (.500), TRUE 80(.500) |
| 1-1/4" IPS(1.660" O.D.) | 12" IPS(12.750" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500) |
| 1-1/2" IPS(1.900" O.D.) | 14" IPS(14.000" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH10 (.188), SCH40 (.375) |
| 2" IPS(2.375" O.D.) | 16" IPS(16.000" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH10(.188), SCH40(.375) |
| 2 1/2" IPS(2.875" O.D.) | 18" IPS (18.000" O.D.) |
| SCH 10, 40, 80, 160, XXH | SCH-40 (.375) |
| 3" IPS( 3.500" O.D.) | |
| SCH 5, 10, 40, 80, 160, XXH |
|
|
Know more about BS EN 10255 Steel Pipe, EN 10255 Tubes available in different sizes buy online and save cost
| Outer diameter and wall Thickness | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Execution | Size Range | OD Tolerance | Wall tolerance | ||||||
| Hot-rolled Tube | OD – 80 mmOD > 80 mmWall < 12 mmWall - 12 mm | ± 0.4 mm± 0.5 % of OD | ± 0.7 mm± (5 % x wallthickness + 0.1 mm | ||||||
| Hot-rolled peeled tube | All sizesWall < 12 mmWall - 12 mm | + 0.25/- 0 mm | ± 0.8 mm± (5 % x wall thickness+ 0.2 mm) | ||||||
| Cold Worked tubecold-rolled or cold-drawn | OD < 40 mmOD 40 - 80 mmOD > 80 Wall Thickness< 6 mm Wall Thickness6 - 8 mm Wall Thickness > 8 | + 0.30/- 0 mm*+ 0.35/- 0 mm*+ 0.40/- 0 mm* | ± 0.30 mm± 0.35 mm± 0.40 mm | ||||||
| Component length (mm) | OD 30-100 mm | OD 100-254 mm |
| 10-100 | + 1.0/- 0 | + 2.0/- 0 |
| 100-600 | + 2.0/- 0 | + 3.0/- 0 |
| 600-1200 | + 3.0/- 0 | + 4.0/- 0 |
| 1200-5000 | + 5.0/- 0 | + 6.0/- 0 |