manufacturer of 38Mn6 Steel Bar in India, buy EN 10294-1 Gr 38Mn6 Carbon Steel Bars at best price
EN 10294-1 Grade 38Mn6 Hollow Bars are made up of a mild carbon steel. The low carbon steel material has 0.22% carbon in the composition. Multi Metals (India) is a leading manufacturer and supplier of the EN 10294-1 Grade 38Mn6 Carbon Steel Seamless Hollow Bars in various dimensions. The hollow bars are used in structural applications, petroleum, oil and gas, general engineering and in other mechanical applications as well.
The 38Mn6 Steel Bar has silicon, manganese, phosphorus, sulfur, molybdenum, nickel, chromium and copper in the composition with trace amounts of other elements as well. The EN 10294-1 Gr 38Mn6 Carbon Steel Bars have good strength, corrosion resistance, ductility and low hardness. However, as a carbon steel, it could be hardened by carburizing procedures. The minimum tensile strength of the Grade 38Mn6 Carbon Steel Hollow Bars is 490MPa.
The bars can be produced as annealed, hardened and tempered or precipitation hardened. There are different finishes to the EN 10294-1 Grade 38Mn6 CS which enable the bars to be more corrosion resistant and long lasting. This also makes the products very much cost effective. Please feel free to contact us for more information on the Mild Steel EN 10294-1 Grade 38Mn6 Bars and the price list.
Check Grade 38Mn6 Carbon Steel Hollow Bars Price list, weight, Dimensions & Sizes
- guarantee of the surfaces without defects with minimum weight loss due to turning.
- high surface quality (guaranted by internal non distructive inspections)
- Improved machinability steels
- tight dimensional tolerances
SS Mild Steel EN 10294-1 Grade 38Mn6 Bars Stockist in Mumbai, India, View EN 10294-1 Grade 38mn6 Bars price list.
|Outer diameter and wall Thickness|
|Execution||Size Range||OD Tolerance||Wall tolerance|
|Hot-rolled Tube||OD – 80 mmOD > 80 mmWall < 12 mmWall - 12 mm||± 0.4 mm± 0.5 % of OD||± 0.7 mm± (5 % x wallthickness + 0.1 mm|
|Hot-rolled peeled tube||All sizesWall < 12 mmWall - 12 mm||+ 0.25/- 0 mm||± 0.8 mm± (5 % x wall thickness+ 0.2 mm)|
|Cold Worked tubecold-rolled or cold-drawn||OD < 40 mmOD 40 - 80 mmOD > 80 Wall Thickness< 6 mm Wall Thickness6 - 8 mm Wall Thickness > 8||+ 0.30/- 0 mm*+ 0.35/- 0 mm*+ 0.40/- 0 mm*||± 0.30 mm± 0.35 mm± 0.40 mm|
|Component length (mm)||OD 30-100 mm||OD 100-254 mm|
|10-100||+ 1.0/- 0||+ 2.0/- 0|
|100-600||+ 2.0/- 0||+ 3.0/- 0|
|600-1200||+ 3.0/- 0||+ 4.0/- 0|
|1200-5000||+ 5.0/- 0||+ 6.0/-|
|Yield Strength||Tensile Strength||Elongation A5 min|
|MPa min||ksi min||MPa min||MPa min||ksi min||Percentage|
|–||EN 10294-1 Grade 38Mn6||–||–||–||–|
buy EN 10294-1 Grade 38Mn6 Carbon Steel Honed Tubes at discounted price
Ready Stock of EN10294-1 Grade 38Mn6 Carbon Steel Round, Culvert, Boom, Square tube
- Heat analysis
- Tensile test
- Impact test (for N and QT supply condition)
- Electromagnetic test acc.to EN 10246-5 Lev. F3 or EN 10246-3 longitudinal Lev. E3 (*)
- Visual and Dimensional control
- Spectro test to avoid miscellaneous*