sales1@multimetalsindia.com
+91 9769008769

Home EN 10210 S355J2H Pipe
EN 10210-1 Grade S355J2H Carbon Steel Seamless Pipes and Tubes Material

EN 10210-1 S355J2H Seamless Pipe and 1.0576 material/ S355J2H Tube supplier in India

EN 10210 S355J2H Pipe and 1.0576 Tube are made up of 0.22% carbon, silicon, 1.6% manganese, phosphorus and sulfur in the composition. Multi Metals (India) is a leading supplier and manufacturer of the EN 10210-1 Steel Pipes in various dimensions and shapes. The material is also strong and corrosion resistant. The minimum yield strength of the tubes is 355MPa and the minimum tensile strength is up to 630MPa depending on the wall thickness of the tubes. The pipes also have 22% elongation rate.

As we are one of the leading S355j2h EN 10210 tube Suppliers we supply these pipes and tubes for oil, gas, fluid exchange, boiler, heat exchanger, petroleum and petrochemical applications. The S355j2h Material pipe comes under the standard BS EN 10210 and has wall thicknesses ranging from 0.5mm to 40mm. There are different grades in this specification such as the EN 10210-1 Grade S355J2H Pipes and Tubes, S275NH, S355JOH, S420NLH, S355NLH, S460NLH, S275JOH, S355J2H, S275NLH, S46INH, S355K2H, S420NH, S355NH, S275J2H and S235JRH.

As we are one of the EN S355J2H Round Pipe Manufacturers we produce the pipes range from 6000mm to 14000mm. The size ranges from 10mm*10mm through 800mm*800mm. Please feel free to order any S355J2H Round Hollow Section or other pipe and tubes.

 

Renowned suppliers of S355j2h EN 10210 tube , see S355j2h Material pipe specification here

 

Material Standards And Grades Of S355J2H EN 10210 Carbon Steel Seamless Pipes
EN 10210 S355J2H Seamless Pipe Wall Thickness 1.0 To 40 mm
EN 10210 S355J2H steel pipe Size

EN 10210 S355J2H Square Pipes – 10 X 10 To 800 X 800 mm
EN 10210 S355J2H Round Pipes – OD 13.7-1214 MM
EN 10210 S355J2H Rectangular Pipes – 10 x 20 To 400 x 800 mm
Length of S355J2H Pipe 6 To 12 Meter & as per Custom Size
S355J2H EN 10210 Welded Pipes Surface Finish Hairline, Shot blasting, Black, Oiled, Anti Corrosive, Paint, Black Phosphating,Mirror, Galvanized
S355J2H EN 10210 Carbon Steel Pipes Type Round, Rectangular,Square
Seamless, ERW, Welded, Fabricated
S355J2H Pipe End Type Screwed, Bevel,Threaded, Plain

 

We stock and produce S355J2H Round Hollow Section in various shapes, check S355J2H EN 10210 Steel Tube Chemical Composition


Heat Treatment of S355j2h EN 10210 tube

Hot Forming Heat Treatment
Temperature°C Cooling Type Normalizing 1″ Stress relieving anneal 2″ Cooling Type
 700-750 Air 850-950°C 580-630°C Air

 

Chemical Properties Of S355j2h Material pipe
Grade C Si Mn P S
S355J2H (1.0576) max 0.22 max 0.55 max 1.6 max 0.03 max 0.03

 

Typical Mechanical Property Ranges Of EN 10210-1 Grade S355J2H Pipes and Tubes
Specification EN10210 S355J2H
Tensile Strength Rm N/mm2: 3 ≤ T ≤ 100mm 470 – 630
Yield Strength ReH Min, N/mm2: T ≤ 16mm 355
Min Elongation % T ≤ 40mm on gauge length 5.65. √S0 22
Impact properties Minimum Ave energy (J) at -20°C 27

 

Material Equivalent Of EN 10210-1 Grade S355J2H Carbon Steel Seamless Pipes and Tubes
DIN EN BS NFA ASTM ASME
– EN 10210-1 Grade S355J2H – – – –

 

S355J2H CHS Tube Size range
Wall Sizes ( O.D.)
.010 1/16" , 1/8" , 3/16"
.020 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8"
.012 1/8"
.016 1/8" , 3/16"
.028 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2"
.035 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.049 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4"
.065 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3"
.083 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3"
.095 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2"
.109 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2"
.120 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3"
.125 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4"
.134 1"
.250 3"
.375 3 1/2"
we maintain S355J2H CHS Tube in ready stock, see S355J2H Material Equivalent

 

S355J2H Round Hollow Section Types
  • SEAMLESS TUBES
  • CARBON STEEL S355J2H EN 10210 PIPE
  • EN10210 S355J2H SEAMLESS PIPE
  • S355J2H EN 10210 HOT FINISHED
  • SEAMLESS TUBULAR HOT FINISHED STRUCTURAL HOLLOW SECTIONS
  • EN10210 S355J2H SEAMLESS TUBES
  • S355J2H EN 10210 HOLLOW SECTION
  • CARBON STEEL S355J2H EN 10210 TUBE
  • EN 10210 S355J2H HOT ROLLED RECTANGULAR PIPE
  • EN 10210 S355J2H HOT ROLLED SQUARE PIPES
  • EN 10210 S355J2H HOT ROLLING SEAMLESS PIPE
  • API TUBING EN 10210 S355J2H
  • S355J2H TUBES
  • S355J2H EN 10210 TUBING
  • EN10210 S355J2H CIRCULAR HOLLOW SECTION
  • EN 10210 – RHS – RECTANGULAR HOLLOW HOT FORMED SECTIONS
  • S355J2H EN 10210 PIPES

 

are you searching for EN10210 S355J2H Seamless Pipe Specification ? find here S355J2H EN 10210 Pipes and Tubing complete information

 

Dimensional Tolerances of S355J2H EN 10210 Steel Tube
Outer diameter and wall Thickness
Execution Size Range OD Tolerance Wall tolerance
Hot-rolled Tube OD – 80 mmOD > 80 mmWall < 12 mmWall - 12 mm ± 0.4 mm± 0.5 % of OD ± 0.7 mm± (5 % x wallthickness + 0.1 mm
Hot-rolled peeled tube All sizesWall < 12 mmWall - 12 mm + 0.25/- 0 mm ± 0.8 mm± (5 % x wall thickness+ 0.2 mm)
Cold Worked tubecold-rolled or cold-drawn OD < 40 mmOD 40 - 80 mmOD > 80 Wall Thickness< 6 mm Wall Thickness6 - 8 mm Wall Thickness > 8 + 0.30/- 0 mm*+ 0.35/- 0 mm*+ 0.40/- 0 mm* ± 0.30 mm± 0.35 mm± 0.40 mm

 

Standard length tolerances of EN10210 S355J2H Seamless Pipe
Component length (mm) OD 30-100 mm OD 100-254 mm
10-100 + 1.0/- 0 + 2.0/- 0
100-600 + 2.0/- 0 + 3.0/- 0
600-1200 + 3.0/- 0 + 4.0/- 0
1200-5000 + 5.0/- 0 + 6.0/- 0

EN S355J2H Round Pipe Size chart
1/8" IPS(.405" O.D.) 3 1/2" IPS( 4.000" O.D.)
SCH 40, 80 SCH 10, 40, 80, 160, XXH
1/4" IPS(.540" O.D.) 4" IPS(4.500" O.D.)
SCH 10, 40, 80 SCH 10, 40, 80, 160, XXH
3/8" IPS(.675" O.D.) 5" IPS( 5.563" O.D.)
SCH 10, 40, 80 SCH 10, 40, 80, 160, XXH
1/2" IPS(.840" O.D.) 6" IPS(6.625" O.D.)
SCH 5, 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
3/4" IPS(1.050" O.D.) 8 ” IPS(8.625" O.D.)
SCH 10, 40, 80, 160, XXH SCH 5, 10, 40, 80, 120, 160, XXH
1" IPS:(1.315′ O.D.) 10" IPS(10.750" O.D.)
SCH 5, 10, 40, 80, 160, XXH SCH 10, 20, 40, 80 (.500), TRUE 80(.500)
1-1/4" IPS(1.660" O.D.) 12" IPS(12.750" O.D.)
SCH 10, 40, 80, 160, XXH SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500)
1-1/2" IPS(1.900" O.D.) 14" IPS(14.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH10 (.188), SCH40 (.375)
2" IPS(2.375" O.D.) 16" IPS(16.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH10(.188), SCH40(.375)
2 1/2" IPS(2.875" O.D.) 18" IPS (18.000" O.D.)
SCH 10, 40, 80, 160, XXH SCH-40 (.375)
3" IPS( 3.500" O.D.)
SCH 5, 10, 40, 80, 160, XXH


Quick delivery of S355j2h En 10210 Tube with MTC of below
  • EN 10210-1 Grade S355J2H carbon steel tube
  • 457-16mm OD, WT 11.8m EN 10210 S355J2H Seamless tube
  • EN10210 / EN10219 S355J2H Structure rectangular and square steel tube
  • SHS SQUARE HOLLOW SECTION EN10210 S355J2H
  • S355J2H Seamless Square Steel Tube
  • Dom S355j2h Bright Annealing Seamless Steel Tube
  • EN 10210 s355j2h pipe and rectangular tube
  • Hot finished EN 10210 S355J2H seamless steel round structural tube
  • EN 10210 S355J2H, en10297 e355, e355 Seamless steel tube
  • EN 10210 EN 10219 S355j2h ERW Square Tube
  • Hot rolled carbon steel en 10210 s355j2h rectangular tube
  • EN 10210 S355J2H Rectangular Hollow Section
  • EN10210 s355j2h seamless carbon steel tube